1 Kit per pack, please choose proper color.
MagicEzy 9 Second Chip Fix is a ready-to-use, colored filler perfect for repairing small holes, chips and gouges on fiberglass, gelcoat, ceramics and stone.
It incorporates the latest nano technology to provide ultimate strength and adhesion. And with a 3 year durability guarantee, you can be assured of a quality, long-lasting repair.
Suitable for many applications including on your boat, jet ski, RV, caravan, shower, bath tub, vanity unit, floor tiles, stone benchtop and many others.
For a gloss finish on top of your chip repair, or for fine cracks which do not require a filler see MagicEzy Hairline Fix.
*Easy to use â no mixing needed
*Built in applicator with level scraper
* Fills & colors â No need to paint-over
* Available in 10 colors
* Nano Technology for ultra strong adhesion
*UV & water resistant
* Non toxic, non hazardous
*Soap & water clean-up
* Can be sanded and drilled
* Air catalyst
* 3 Year durability guarantee
* Can also be used to repair tiles, stone and timber
Do not use below 10°C / 50°F Suitable for above the waterline use.
*Prepare
1. Grab a cup of soapy water, flush out the chip, then rinse it out with clean water.
2. Allow to fully dry in sun or accelerate dry with a hairdryer.
3. Give the tube a massage / knead for about two minutes to prepare and mix.
Apply 4. Squeeze enough 9 Second Chip Fix to slightly overfill the damage (whilst holding a tissue in your spare hand).
Level 5. Quickly turn tube up the opposite way to use the level scraper on the end of tube.
6. Start from the centre of the chip, very gently level scrape toward the outer edge at 90°. Repeat from the centre to the opposite side. Donât worry if the repairâs not perfect at this stage, it will be fixed with the next layer. Trim
7. Now clean the level scraper with a tissue and use it again to trim and scrape away any excess smears. Avoid excessive tampering.
8. For a fully filled repair, it will need at least 2 coats of 9 Second Chip Fix. Wait 2 hours in between coats.
9. IMPORTANTâ If the temperature is expected to drop below 20°C / 70°F within 24 hours, blow dry the repair with a warm hairdryer for about 2 minutes after each coat. Allow 48 hours before subjecting the repair to moisture or contact. MagicEzy will continue to strengthen and harden over the next 21 days.
