A good storage cover is essential to protect your Yamaha PWC while it is stored.
WaterCraft Superstore makes an excellent Custom Storage Cover for just that purpose.
Just select your color preferences and we can custom make your cover to look the way you want it.
*Please be sure that your specific model is listed in the applications tab as these covers are non-returnable*
Our cover is made of 600D solution dyed polyester, which means the color goes all the way through and
is much more fade resistant than other covers. Each Yamaha Wave Runner PWC storage cover comes with a tie down strap kit
for trailering and a storage bag to keep your Yamaha PWC storage cover in while you are out riding.
The Yamaha PWC storage cover works great for indoor and outdoor storage applications and the 600D material is breathable
to help prevent mildew growth and allow moisture to evaporate.
Yamaha PWC storage covers have a 1 year warranty against defects in workmanship or material.
1996 SUPER JET 700
1997 SUPER JET 700
1998 SUPER JET 700
1999 SUPER JET 700
2000 SUPER JET 700
2001 SUPER JET 700
2002 SUPER JET 700
2003 SUPER JET 700
2004 SUPER JET 700
2006 SUPER JET 700
2009 SUPER JET
2010 SUPER JET
2011 SUPER JET
2013 SUPER JET
2014 SUPER JET
2015 SUPER JET
2016 SUPER JET
2017 SUPER JET
2018 SUPER JET
Your new Watercraft Superstore cover is designed to give years of protection to your PWC. To install the cover, it is best to start at the handle bars and mirrors (if equipped) then pull the cover forward over the bow and rearward over the stern of the craft.
The shock cord installed at the hem of the cover should be pulled down under the rub rail of the PWC. Most covers will hold in place with just the use of the sock cord for stationary storage.
If the craft is going to be towed ro is stored in an area that gets high winds, we suggest using the provided tie down straps to wrap under the PWC to secure the cover.
The watercraft should always be clean before installing any cover to prevent damage to the finish.
Watercraft Superstore covers have a 1 year manufacturer's warranty against defect in material and workmanship. This warranty does not cover fading, tearing or stains which are likely during normal use. Environments with extreme weather conditions might have an adverse effect on the longevity of the material which will not be covered under warranty.
If you should have a problem or questions, please contact Watercraft Superstore @866-957-9277 or firstname.lastname@example.org
Cleaning and Maintenance of the cover should be done periodically to help extend the life of the cover.
To clean the cover, we suggest a mild liquid soap similar to soap used to wash the PWC. For bird droppings or other hard to clean spots, it may be necessary to use a scrub brush.
You can rinse the cover with a standard garden hose. We do not suggest using a pressure washer since the pressure could be high enough to damage the material.
If the cover is used outdoors, we suggest re-treating the cover with a water repellant treatment such as 303 High Tech Fabric Guard (available at Watercraft Superstore or other marine supply stores) at least once a year to help with water repellency as well as UV protection.
Custom order will ship 3-5 business days after order is received.