Solas Concord Impeller for Yamaha YB-CD-13/17

Concord - The Power Torque Series

With features like a large blade area and a unique geometric blade design, the SOLAS Concord Impeller delivers remarkable thrust and extraordinary efficiency.
As four stroke technology becomes mainstream in the PWC world, the Concord design truly enhances the engine characteristics, not only delivering incredible acceleration but excellent top end performance.
From water skiing to high speed cruising, this technologically advanced power torque design with its radial leading edge will offer everything you could ask for in an impeller.

1998 Wave Runner XL800
1999 Wave Runner XL800

1997 Wave Runner GP760
1998 Wave Runner GP760
1999 Wave Runner GP760
2000 Wave Runner GP760

1994 Wave Raider 700
1995 Wave Raider 700
1996 Wave Raider 700
1997 Wave Raider 700

1994 Wave Deluxe
1995 Wave Deluxe
1996 Wave Deluxe
1997 Wave Deluxe

1994 Venture
1995 Venture
1996 Venture
1997 Venture

1993 Pro VXR
1994 Pro VXR
1995 Pro VXR
1996 Pro VXR
1997 Pro VXR

1994 SuperJet
1995 SuperJet
1996 SuperJet
1997 SuperJet
1998 SuperJet
1999 SuperJet
2000 SuperJet
2001 SuperJet
2002 SuperJet
2003 SuperJet
2004 SuperJet
2006 SuperJet
2007 SuperJet

1.)Remove and separate the whole jet pump from the PWC

2.)For YH Series impeller, remove the trail cone (or cap) from the stator. For all others, hold the front end of the drive shaft with a shaft holder (optional part) on bench vise.

3.)Hold the rear end of the shaft with a bench vise. Remove the impeller with an impeller wrench (optional part). Turning counter clockwise will loosen the impeller.

4.)Visually inspect thread on shaft and impeller for debris or damage. Apply grease or anti-seize on the thread before installation.

5.)Screw the impeller by hand; please be careful of the sharp edge of the impeller. Tighten with the impeller wrench. If the impeller feels too tight or not threaded properly, unscrew the impeller, clean and check the thread.

6.)Assemble the pump and refill O/E pump oil or grease to spec. (for YH series assemble the pump and put it back on the PWC)

*this installation guide is suggested for reference only
*please refer to your original service manual or contact your PWC dealer for detail
*guide provided by Solas
*some wrenches are optional parts and are available for purchase on our website

Impeller Series	Wrench	Holder	Seal
YA Super Camber (ABC/IJK Series)	WR003	WR003H	SL003
YB Super Camber (IJK Series) XProp Series, Concord Series	WR004	WR004H	SLA008 (18mm shaft) SL008A (15mm shaft)
YD Super Camber Series (IJK Series) Xprop Series	WR004	WR004H	SLA008
YD Concord Series	WR007	WR007H	SLA009A
YF Concord/Xprop Series	WR007	WR007H	SLA009
YG Dynafly Series	WR007	WR007H	SLA009
YS Dynafly Series	WR014	WR014H	SLA014
YS Concord Series	WR014	WR014H	SLA016
YH Concord Series (only for 2005-06 VX110 Sport and VX700 2006)	WR001	Â	SLA009