Trailerable Storage cover with vents for Yamaha 2012-2022 FX HO, SHO , - Watercraft Superstore
0

Your Cart is Empty

Trailerable Storage cover with vents for Yamaha 2012-2022 FX HO, SHO , SVHO/Limited, Cruiser

111WS422-V

A good Storage cover with vents is essential to protect your Yamaha watercraft while traveling around town or stored away.

Our cover is made of 600D solution dyed polyester, which means the color goes all the way through and
is much more fade resistant than other covers. Each PWC Storage cover with vents comes with a tie down strap kit for trailering around town.

These covers work great for indoor and outdoor storage applications and the 600D material is breathable to help prevent mildew growth and allow moisture to evaporate.

All covers come in a Black and Gray 2 tone color pattern. They have a reflective strip for traveling, as well as an opening for the dockline when not in use.

All covers have a 1 year warranty against defects in workmanship or material.

2012       FX HO<br>

2012       FX SHO<br>

2012       FX CRUISER HO<br>

2012       FX CRUISER SHO   <br><br>  

2013       FX HO<br>

2013       FX SHO<br>

2013       FX CRUISER HO<br>

2013       FX CRUISER SHO<br><br>

2014       FX HO<br>

2014       FX SHO<br>

2014       FX SVHO<br>

2014       FX Cruiser HO<br>

2014       FX Cruiser SHO<br>

2014       FX Cruiser SVHO<br><br>

2015       FX Cruiser SVHO<br>

2015       FX SVHO<br>

2015       FX Cruiser SHO<br>

2015       FX SHO<br>

2015       FX Cruiser HO<br>

2015       FX HO<br><br>

2016       FX SVHO<br>

2016       FX Crusier SVHO<br>

2016       FX Cruiser SHO<br>

2016       FX Cruiser HO<br>

2016       FX HO<br><br>

2017       FX HO<br>

2017       FX Cruiser HO<br>

2017       FX SVHO<br>

2017       FX Cruiser SVHO<br>

2017       FX Limited SVHO<br><br>

2018       FX HO<br>

2018       FX Cruiser HO<br>

2018       FX SVHO<br>

2018       FX Cruiser SVHO<br>

2018       FX Limited SVHO<br>

2019       FX HO<br>

2019       FX Cruiser HO<br>

2019       FX SVHO<br>

2019       FX Cruiser SVHO<br>

2019       FX Limted SVHO<br><br>

2020       FX HO<br>

2020       FX Cruiser HO<br>

2020       FX Limited SVHO<br><br>

2021       FX Cruiser HO<br>

2021       FX Crusier SVHO<br>

2021       FX HO<br>

2021       FX Limited SVHO<br>

2021       FX SVHO<br>

2022       FX Limited SVHO

2022       FX SVHO


Your new Watercraft Superstore cover is designed to give years of protection to your PWC. To install the cover, it is best to start at the handle bars and mirrors (if equipped) then pull the cover forward over the bow and rearward over the stern of the craft.

The shock cord installed at the hem of the cover should be pulled down under the rub rail of the PWC. Most covers will hold in place with just the use of the shock cord for stationary storage.

If the craft is going to be towed or is stored in an area that gets high winds, we suggest using the provided tie down straps to wrap under the PWC to secure the cover.
The watercraft should always be clean before installing any cover to prevent damage to the finish.
Watercraft Superstore covers have a 1 year manufacturer's warranty against defect in material and workmanship. This warranty does not cover fading, tearing or stains which are likely during normal use. Environments with extreme weather conditions might have an adverse effect on the longevity of the material which will not be covered under warranty.

If you should have a problem or questions, please contact Watercraft Superstore @727-499-9707 or sales@watercraftsuperstore.net
Cleaning and Maintenance of the cover should be done periodically to help extend the life of the cover.

To clean the cover, we suggest a mild liquid soap similar to soap used to wash the PWC. For bird droppings or other hard to clean spots, it may be necessary to use a scrub brush.

You can rinse the cover with a standard garden hose. We do not suggest using a pressure washer since the pressure could be high enough to damage the material.

If the cover is used outdoors, we suggest re-treating the cover with a water repellant treatment such as 303 High Tech Fabric Guard (available at Watercraft Superstore or other marine supply stores) at least once a year to help with water repellency as well as UV protection.
Earn Points on this purchase. Learn more